- Region
- North West
- Nation
- England
- Towns listed
- 10
- Main postcode areas
- CH, L, PR, WA
- Typical lead time
- 4–6 weeks
What should Merseyside projects plan for?
Parking and loading in central Liverpool can be restricted, so glass deliveries are booked into agreed slots and panels are sized to fit the lifts and stairwells we measured on survey.
Offices in Liverpool range from first-floor suites above the high street to modern units on the edge of town, and the right partition system depends as much on the building as on the budget.
How much do fire rated glass partitions cost in Merseyside?
Insulated EI glass costs considerably more than integrity-only E glass, and the duration, frame system and fire-rated door sets account for most of the remaining range. Typical lead time: 4–6 weeks. Guide prices, supply and install — fixed after a free survey.
Why choose us in Merseyside?
Covering all of Merseyside
Survey and installation teams cover Liverpool and the wider Merseyside area, including Liverpool and Birkenhead.
Tested systems, documented
We use manufacturers' tested partition systems and hand over the relevant performance and test evidence at completion.
Compliance designed in
We check the required duration and E or EI class against your fire strategy before ordering, so the wall is right first time rather than reworked.
Matched door sets
Fire-rated glazed doors are supplied as complete tested door sets with compatible hardware, avoiding the common fault of mixing uncertified components.
That distinction drives cost. Integrity-only glass stops flames and smoke but lets radiant heat through, which may be acceptable in some locations. Insulating glass contains intumescent interlayers that foam in a fire and keep the far side cool enough for people to pass safely, and it is considerably more expensive. We supply complete tested systems and hand over the manufacturer's test evidence and classification for the specified system, so your fire engineer, Building Control and landlord can see exactly what was installed and how it was tested.
Key specifications
| Partition test standard | Non-loadbearing partitions tested to BS EN 1364-1 |
|---|---|
| Glass | Fire-resistant toughened or laminated (E); multi-layer intumescent insulating glass (EI) |
| Frames | Tested steel or aluminium framing with intumescent seals and specified fixings |
| Regulations | Approved Document B; Approved Document K for safety glazing and manifestation |
Surveys across Merseyside
Survey visits across Merseyside — including Liverpool, Liverpool and Birkenhead — are free and carry no obligation. We measure, photograph and note services so the quote is accurate first time.
In England, partition works that affect fire safety or means of escape fall under the Building Regulations, so we flag anything that may need Building Control at survey stage.
How does a project run?
Book a survey
A member of the team measures the Liverpool office, notes access and services, and discusses layout, privacy and acoustics with you.
Design and fixed price
You receive a layout, specification and a fixed, itemised quote. Nothing is ordered until you are happy with the drawings.
Production and logistics
Made-to-measure panels are produced and we book deliveries, lifts and parking around your building.
Fit, check and hand over
Installation is completed, doors and seals are adjusted, the area is cleaned and the job is signed off with you.
Towns we cover for fire rated glass partitions in Merseyside
- Fire Rated Glass Partitions in Liverpool
- Fire Rated Glass Partitions in Birkenhead
- Fire Rated Glass Partitions in St Helens
- Fire Rated Glass Partitions in Southport
- Fire Rated Glass Partitions in Bootle
- Fire Rated Glass Partitions in Wallasey
- Fire Rated Glass Partitions in Huyton
- Fire Rated Glass Partitions in Kirkby
- Fire Rated Glass Partitions in Formby
- Fire Rated Glass Partitions in Crosby
Fire Rated Glass Partitions in Merseyside: FAQs
How much do fire rated glass partitions cost in Liverpool?
Our guide price for fire rated glass partitions is £850–£1,400 per m², supply and install, excluding VAT. The final price for a Liverpool project depends on the measured size, doors, glass or board specification and access, and is fixed after the free survey.
Do you cover areas near Liverpool?
Yes. As well as Liverpool we regularly cover Liverpool, Birkenhead and St Helens, plus the rest of Merseyside and North West. Survey and installation teams are arranged regionally.
What is the difference between E and EI fire rated glass?
E rated glass provides integrity only: it stops flames and hot gases passing through for the stated time but transmits heat. EI rated glass also provides insulation, limiting the temperature on the protected side, so people can pass close to it safely. EI is required in many escape routes and costs considerably more.
Is the glass alone enough to make a partition fire rated?
No. Fire performance applies only to the complete tested system, meaning the glass, frame, seals, fixings and door hardware installed as tested. Fitting fire-rated glass into a standard frame does not create a fire-rated wall. We supply complete tested systems and hand over the manufacturer's test evidence and classification.
Tell us about your Liverpool office and we will arrange a free survey and a fixed, written quote for your fire rated glass partitions.