How much do glass office partitions cost?
The glazing type sets the band: single-glazed frameless sits at the lower end, while double-glazed, acoustic and black-framed steel-look systems sit at the top, with doors and ceiling height adding to it. Typical lead time: 2–5 weeks. Guide prices, supply and install — fixed after a free survey.
Why choose glass office partitions?
Most office floors are let as open shells, so the occupier decides where meeting rooms, manager offices and quiet spaces go. Glass partitions are the usual answer because they create enclosed rooms without blocking the daylight that reaches the middle of the floor from the perimeter windows. This page covers every glazed system we install, from simple single-glazed frameless screens to double-glazed acoustic walls, black-framed steel-look grids and timber-framed glazing. If you already know the system you want, follow the links to the dedicated pages; if not, start here and compare.
The right choice comes down to three questions. How private must conversations be? That decides single versus double glazing and the acoustic rating. Does the line of the partition form part of an escape route or fire compartment? That decides whether a tested fire-rated system is needed. And how long will you stay in the space? Short leases favour framed systems that can be taken down and reused. We survey the floor, check ceiling and floor build-ups, and price the options side by side so the trade-offs are clear before you commit.
Daylight reaches the middle
Glazed walls let natural light travel from perimeter windows into interior rooms and corridors, reducing the number of dark internal offices that need artificial lighting all day.
Privacy set room by room
Acoustic glass, double glazing, integral blinds and privacy film let you decide how much is seen and heard in each space, rather than accepting one standard everywhere.
Quicker than building walls
Framed and frameless systems are made to survey dimensions off site, so most rooms go up in days with far less dust and fewer wet trades than block or plastered walls.
Reusable on shorter leases
Many framed systems can be demounted and refitted when the team grows or the lease ends, which protects part of the investment on a five or ten year term.
What are the specifications?
| Glazing | 10mm or 12mm toughened to BS EN 12150, or 10.8–12.8mm laminated to BS EN 14449 |
|---|---|
| Configurations | Single glazed, double glazed, framed, frameless butt-joint, curved |
| Acoustic performance | Approx. Rw 32–35 dB single toughened up to Rw 42–52 dB double glazed (lab, BS EN ISO 717-1) |
| Panel height | Up to approx. 3m standard; taller with thicker or laminated glass |
| Framing | Extruded aluminium head and base track with deflection head; anodised or powder-coated |
| Doors | Frameless glass, framed aluminium, timber or double-glazed; single, double or sliding |
| Impact safety | Classified to BS EN 12600 to suit the location, e.g. 1(C)1 toughened or 1(B)1 laminated |
| Manifestation | Two zones at 850–1000mm and 1400–1600mm above floor level (Approved Document K) |
Where are glass office partitions used?
- Meeting and board rooms
- Manager and private offices
- Open-plan zone dividers
- Reception and breakout screens
- Corridor and circulation walls
- Training and interview rooms
What regulations and practical points apply?
All glass in office partitions sits in critical locations under Approved Document K, so it must be safety glass and carry manifestation in two bands, 850–1000mm and 1400–1600mm above floor level; regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 makes the same point for employers. If a new wall changes a means of escape, cuts off ventilation or narrows doors below Approved Document M guidance, Building Control may need to be involved. In leased buildings, expect to apply for a licence for alterations and allow time for the landlord's surveyor to review drawings and method statements before work starts.
How is it installed?
After a measured survey we produce drawings for approval and order glass to size. On site, the team protects floors, fixes the head track to the soffit or ceiling grid and the base channel to the floor, then installs glass panels, door frames and doors. Seals, joints and manifestation follow. A single meeting room usually takes one to two days on site; a full floor of rooms can take one to two weeks, and the work can be phased around occupied areas.
Free survey
We visit, measure up, check ceilings, floors and services, and talk through how the space needs to work.
Design and fixed price
You receive a layout, specification and a fixed, itemised quote. Nothing is ordered until you approve the drawings.
Manufacture and planning
Glass and components are made to the surveyed sizes while we plan access, deliveries and any out-of-hours working.
Installation and handover
The team installs, snags and cleans, then hands over with test evidence and care guidance.
Glass Office Partitions FAQs
How much do glass office partitions cost?
Glass office partitions typically cost £280–£900 per m² supplied and installed, excluding VAT. Single-glazed frameless sits at the lower end, while double-glazed, acoustic and black-framed steel-look systems sit towards the top. Doors, ceiling height, access and out-of-hours working also move the figure, so we confirm a fixed price after a free site survey.
Do glass partitions need Building Regulations approval?
Not always, but it should always be checked. A partition that alters an escape route, a fire compartment line, ventilation or accessible door widths may need Building Control involvement. The glazing itself must meet Approved Document K for safety glass and manifestation. We flag these points at survey and supply drawings and product data for any submission.
Should I choose single or double glazed office partitions?
Choose by how the room will be used. Single-glazed partitions, around Rw 32–40 dB in lab tests, suit collaboration rooms and zone dividers. Double-glazed systems, typically Rw 42–52 dB, suit HR rooms, board rooms and anywhere confidential calls happen. Expect a few decibels less on site, because sound also travels through ceilings and junctions.
How long does it take to install glass partitions?
A single glazed meeting room usually takes one to two days on site once materials arrive. Lead times for glass and frames are typically two to five weeks from drawing sign-off, depending on the system. Larger projects are phased so teams can keep working, and noisy tasks can be scheduled out of hours where needed.
Can glass partitions be moved if we relocate?
Framed glazed systems can usually be taken down and refitted, often for well under the cost of new, provided panel sizes suit the new layout. Frameless systems sealed with silicone joints are harder to reuse. If a move is likely within your lease, mention it at survey so we specify a system that can be relocated.