- Postcode area
- PO
- County
- West Sussex
- Region
- South East
- Population (approx.)
- 32,000
- From our Birmingham office
- 129 miles
- Typical lead time
- 4–6 weeks
Planning fire rated glass partitions in Chichester: local points
Smaller Chichester offices often need just a few metres of partitioning — a manager's room, a meeting space or a quiet booth — and we are happy to take on compact jobs as well as larger ones.
For Chichester businesses that share a building, we keep noise, dust and deliveries to agreed windows so neighbours are not disturbed.
Fire Rated Glass Partitions prices in Chichester
Insulated EI glass costs considerably more than integrity-only E glass, and the duration, frame system and fire-rated door sets account for most of the remaining range. Typical lead time: 4–6 weeks. Guide prices, supply and install — fixed after a free survey.
What do you get with us in Chichester?
Compliance designed in
We check the required duration and E or EI class against your fire strategy before ordering, so the wall is right first time rather than reworked.
Clear guide prices online
Our fire rated glass partitions prices are published as guide ranges, so you can budget before the survey.
Tidy, protected sites
Floors and finishes are protected, waste is removed and the area is cleaned before handover.
Evidence handed over
We provide the manufacturer's test evidence and classification for the installed system, so Building Control, insurers and landlords can verify what is in the wall.
Typical fire rated glass partitions projects we see in Chichester include escape corridors, stair and lift lobbies and kitchen and tea point enclosures. Corridors, stair lobbies and compartment walls can stay bright and open while still meeting the fire strategy, instead of becoming dark solid-walled routes.
Specification highlights
| Classification | E 30 / E 60 (integrity) or EI 30 / EI 60 (integrity and insulation) |
|---|---|
| Partition test standard | Non-loadbearing partitions tested to BS EN 1364-1 |
| Glass | Fire-resistant toughened or laminated (E); multi-layer intumescent insulating glass (EI) |
Covering Chichester and nearby
Chichester sits about 129 miles from our Birmingham base. Surveys are booked at a time that suits you, including early mornings, and the same project contact stays with you through to installation.
In England, partition works that affect fire safety or means of escape fall under the Building Regulations, so we flag anything that may need Building Control at survey stage.
How does a Chichester project run?
Measure and assess
We take accurate measurements on site in Chichester, check the ceiling void and floor, and agree what the new layout must achieve.
Drawings and quote
We prepare drawings and an itemised fixed price, adjusting the design until it works for your team and budget.
Manufacture and planning
Glass and components are made to the surveyed sizes while we plan access, deliveries and any out-of-hours working.
Installation and handover
The team installs, snags and cleans, then hands over the site with any test evidence and care guidance.
Questions about fire rated glass partitions in Chichester
Will our Chichester landlord need to approve the partitions?
If you lease your Chichester office, the lease will usually require landlord consent — often a licence for alterations — before partitions are installed. We supply drawings, specifications and method statements to support the application.
Do you cover areas near Chichester?
Yes. As well as Chichester we regularly cover Bognor Regis, Havant and Portsmouth, plus the rest of West Sussex and South East. Survey and installation teams are arranged regionally.
What is the difference between E and EI fire rated glass?
E rated glass provides integrity only: it stops flames and hot gases passing through for the stated time but transmits heat. EI rated glass also provides insulation, limiting the temperature on the protected side, so people can pass close to it safely. EI is required in many escape routes and costs considerably more.
Is the glass alone enough to make a partition fire rated?
No. Fire performance applies only to the complete tested system, meaning the glass, frame, seals, fixings and door hardware installed as tested. Fitting fire-rated glass into a standard frame does not create a fire-rated wall. We supply complete tested systems and hand over the manufacturer's test evidence and classification.
Ready to plan fire rated glass partitions in Chichester? Send a few details or call us and we will book a survey at a time that suits.