- Region
- Northern Ireland
- Nation
- Northern Ireland
- Towns listed
- 6
- Main postcode areas
- BT
- Typical lead time
- 1–3 weeks
What should County Down projects plan for?
Offices in Bangor range from first-floor suites above the high street to modern units on the edge of town, and the right partition system depends as much on the building as on the budget.
Converted buildings in and around Bangor often bring tricky ceiling lines and out-of-square walls; site-measured glass and adjustable head tracks take care of both.
How much do fire rated partition walls cost in County Down?
The required duration (30, 60 or 90 minutes), number of fire board layers, wall height and the extent of fire stopping around services and at the head set the price. Typical lead time: 1–3 weeks. Guide prices, supply and install — fixed after a free survey.
Why choose us in County Down?
One point of contact
A single project contact handles survey, drawings, ordering and installation, so you are not chasing different trades.
Work around your hours
Evening and weekend installation can be arranged for occupied Bangor offices, keeping disruption to a minimum.
Acoustic bonus
Multi-layer fire walls are also good acoustic walls, so plant rooms and stair enclosures keep noise away from the surrounding office.
Penetrations planned
Services crossing the wall are coordinated in advance and sealed with tested products, which is where most fire walls actually fail in inspections.
Office fit-outs often include walls that have a fire job to do: corridor walls on a protected escape route, enclosures around stairs, risers and plant, and walls that separate tenancies or compartments. A fire rated partition wall is built using the board manufacturer's tested system, specifying stud size, board type and number of layers, fixings, insulation and how the head and junctions are detailed. Follow that system and the wall carries its classified rating; deviate from it and the rating no longer applies.
Key specifications
| Framing | Steel studs 50–146mm at the system's specified centres |
|---|---|
| Insulation | Mineral wool to the system specification |
| Head detail | Tested fire-rated deflection head to accommodate slab movement |
| Acoustic performance | Approx. Rw 45–55 dB depending on build-up (lab) |
Surveys across County Down
We cover Bangor along with nearby Bangor, Newry and Newtownards. Surveys are free and usually take under an hour for a typical office floor.
In Northern Ireland, the Building Regulations (Northern Ireland) apply and are administered by the local council's building control team; we flag anything that may need approval at survey stage.
How does a project run?
Measure and assess
We take accurate measurements on site in Bangor, check the ceiling void and floor, and agree what the new layout must achieve.
Drawings and quote
We prepare drawings and an itemised fixed price, adjusting the design until it works for your team and budget.
Production and logistics
Made-to-measure panels are produced and we book deliveries, lifts and parking around your building.
Fit, check and hand over
Installation is completed, doors and seals are adjusted, the area is cleaned and the job is signed off with you.
Towns we cover for fire rated partition walls in County Down
- Fire Rated Partition Walls in Bangor
- Fire Rated Partition Walls in Newry
- Fire Rated Partition Walls in Newtownards
- Fire Rated Partition Walls in Banbridge
- Fire Rated Partition Walls in Downpatrick
- Fire Rated Partition Walls in Holywood
Fire Rated Partition Walls in County Down: FAQs
How much do fire rated partition walls cost in Bangor?
Our guide price for fire rated partition walls is £75–£125 per m², supply and install, excluding VAT. The final price for a Bangor project depends on the measured size, doors, glass or board specification and access, and is fixed after the free survey.
Will our Bangor landlord need to approve the partitions?
If you lease your Bangor office, the lease will usually require landlord consent — often a licence for alterations — before partitions are installed. We supply drawings, specifications and method statements to support the application.
Do fire rated walls need fire doors?
Yes. A door in a fire rated wall must be a fire door set tested to the same or appropriate rating, with compatible frame, hinges, closer, seals and signage. A standard door undermines the wall. We supply complete tested door sets and can check existing doors for suitability.
Who signs off a fire rated partition wall?
Where walls affect escape routes or compartmentation, Building Control normally reviews and inspects the work. Your fire risk assessor will also want evidence for the fire risk assessment. We hand over the system classification, fire-stopping records and photographs so both can verify what was built.
Tell us about your Bangor office and we will arrange a free survey and a fixed, written quote for your fire rated partition walls.