- Region
- North West
- Nation
- England
- Towns listed
- 6
- Main postcode areas
- CA, LA
- Typical lead time
- 1–3 weeks
What should Cumbria projects plan for?
Offices in Carlisle range from first-floor suites above the high street to modern units on the edge of town, and the right partition system depends as much on the building as on the budget.
For Carlisle offices that stay occupied during the works, we split the installation into zones so only a small part of the floor is affected at any one time.
How much do fire rated partition walls cost in Cumbria?
The required duration (30, 60 or 90 minutes), number of fire board layers, wall height and the extent of fire stopping around services and at the head set the price. Typical lead time: 1–3 weeks. Guide prices, supply and install — fixed after a free survey.
Why choose us in Cumbria?
Handover records
You receive the system classification, fire-stopping record and photographs, giving your fire risk assessor and Building Control clear evidence of what was built.
Work around your hours
Evening and weekend installation can be arranged for occupied Carlisle offices, keeping disruption to a minimum.
Tidy, protected sites
Floors and finishes are protected, waste is removed and the area is cleaned before handover.
Acoustic bonus
Multi-layer fire walls are also good acoustic walls, so plant rooms and stair enclosures keep noise away from the surrounding office.
Office fit-outs often include walls that have a fire job to do: corridor walls on a protected escape route, enclosures around stairs, risers and plant, and walls that separate tenancies or compartments. A fire rated partition wall is built using the board manufacturer's tested system, specifying stud size, board type and number of layers, fixings, insulation and how the head and junctions are detailed. Follow that system and the wall carries its classified rating; deviate from it and the rating no longer applies.
Key specifications
| Test standard | Non-loadbearing walls tested to BS EN 1364-1 (older data to BS 476-22) |
|---|---|
| Framing | Steel studs 50–146mm at the system's specified centres |
| Boarding | One to three layers of 12.5mm or 15mm fire-resistant plasterboard each side |
| Insulation | Mineral wool to the system specification |
Surveys across Cumbria
We cover Carlisle along with nearby Carlisle, Kendal and Barrow-in-Furness. Surveys are free and usually take under an hour for a typical office floor.
In England, partition works that affect fire safety or means of escape fall under the Building Regulations, so we flag anything that may need Building Control at survey stage.
How does a project run?
Measure and assess
We take accurate measurements on site in Carlisle, check the ceiling void and floor, and agree what the new layout must achieve.
Drawings and quote
We prepare drawings and an itemised fixed price, adjusting the design until it works for your team and budget.
Manufacture and planning
Glass and components are made to the surveyed sizes while we plan access, deliveries and any out-of-hours working.
Install and sign-off
We fit the partitions with minimal disruption, complete snagging and walk you through the finished space.
Towns we cover for fire rated partition walls in Cumbria
- Fire Rated Partition Walls in Carlisle
- Fire Rated Partition Walls in Kendal
- Fire Rated Partition Walls in Barrow-in-Furness
- Fire Rated Partition Walls in Workington
- Fire Rated Partition Walls in Whitehaven
- Fire Rated Partition Walls in Penrith
Fire Rated Partition Walls in Cumbria: FAQs
Do you install fire rated partition walls in Carlisle?
Yes. We survey, supply and install fire rated partition walls throughout Carlisle and the wider Cumbria area, including Carlisle and Kendal. The survey is free and you receive a fixed, written quote before any work is booked.
How much do fire rated partition walls cost in Carlisle?
Our guide price for fire rated partition walls is £75–£125 per m², supply and install, excluding VAT. The final price for a Carlisle project depends on the measured size, doors, glass or board specification and access, and is fixed after the free survey.
What makes a partition wall fire rated?
A partition wall is fire rated when it is built to a manufacturer's tested system, using the specified studs, fire-resistant boards, insulation, fixings and head detail, and installed exactly as tested. Every service penetration must also be fire stopped with compatible tested products. Using fire board alone does not make a wall fire rated.
How long does a fire rated stud wall last in a fire?
Office fire walls are commonly classified for 30, 60 or 90 minutes, such as EI 30 or EI 60. That figure is the time the tested wall maintained integrity and insulation in a standard furnace test. The duration you need is set by the building's fire strategy and Approved Document B.
Get a guide price for fire rated partition walls in Carlisle in under a minute with our quote tool, or ask for a free survey and fixed quote.