- Region
- East Midlands
- Nation
- England
- Towns listed
- 7
- Main postcode areas
- DE, NG, S, SK
- Typical lead time
- 1–3 weeks
What should Derbyshire projects plan for?
A lot of Derby's office space sits in multi-let buildings where the landlord's fit-out rules set what can fix to ceilings and floors. We read those rules early so the design is approved first time.
Across Derby we see a lot of mixed-use space — offices next to workshops, clinics or showrooms — where partitions have to deal with noise, dust or fire separation as well as privacy.
How much do fire rated partition walls cost in Derbyshire?
The required duration (30, 60 or 90 minutes), number of fire board layers, wall height and the extent of fire stopping around services and at the head set the price. Typical lead time: 1–3 weeks. Guide prices, supply and install — fixed after a free survey.
Why choose us in Derbyshire?
Fixed price, in writing
Your quote lists the system, glass, doors, finishes and any extras, so the figure you approve is the figure you pay.
Built to the tested system
We follow the manufacturer's tested details for studs, boards, fixings and head, so the wall achieves the classification it is meant to have.
Landlord-ready paperwork
Drawings, method statements and risk assessments are supplied for your landlord or managing agent's approval.
Handover records
You receive the system classification, fire-stopping record and photographs, giving your fire risk assessor and Building Control clear evidence of what was built.
The most common failures are not the boards but the gaps. Cables, pipes and ducts passing through the wall, sockets and back boxes, deflection heads and junctions with the façade all need fire stopping that is compatible with the wall's rating. We plan penetrations with your M&E contractor, use tested fire-stopping products and record what was installed, with photos taken before the second side is closed. At handover you receive the system classification and the fire-stopping record, which your fire risk assessor and Building Control will want to see.
Key specifications
| Classification | EI 30, EI 60 or EI 90 integrity and insulation, to the tested system |
|---|---|
| Test standard | Non-loadbearing walls tested to BS EN 1364-1 (older data to BS 476-22) |
| Framing | Steel studs 50–146mm at the system's specified centres |
| Insulation | Mineral wool to the system specification |
Surveys across Derbyshire
We cover Derby along with nearby Derby, Chesterfield and Ilkeston. Surveys are free and usually take under an hour for a typical office floor.
In England, partition works that affect fire safety or means of escape fall under the Building Regulations, so we flag anything that may need Building Control at survey stage.
How does a project run?
Measure and assess
We take accurate measurements on site in Derby, check the ceiling void and floor, and agree what the new layout must achieve.
Specification sign-off
Drawings, system choice, glass and door details are confirmed in writing alongside a fixed quote.
Manufacture and planning
Glass and components are made to the surveyed sizes while we plan access, deliveries and any out-of-hours working.
Install and sign-off
We fit the partitions with minimal disruption, complete snagging and walk you through the finished space.
Towns we cover for fire rated partition walls in Derbyshire
- Fire Rated Partition Walls in Derby
- Fire Rated Partition Walls in Chesterfield
- Fire Rated Partition Walls in Ilkeston
- Fire Rated Partition Walls in Long Eaton
- Fire Rated Partition Walls in Swadlincote
- Fire Rated Partition Walls in Buxton
- Fire Rated Partition Walls in Matlock
Fire Rated Partition Walls in Derbyshire: FAQs
Do you install fire rated partition walls in Derby?
Yes. We survey, supply and install fire rated partition walls throughout Derby and the wider Derbyshire area, including Derby and Chesterfield. The survey is free and you receive a fixed, written quote before any work is booked.
How much do fire rated partition walls cost in Derby?
Our guide price for fire rated partition walls is £75–£125 per m², supply and install, excluding VAT. The final price for a Derby project depends on the measured size, doors, glass or board specification and access, and is fixed after the free survey.
What makes a partition wall fire rated?
A partition wall is fire rated when it is built to a manufacturer's tested system, using the specified studs, fire-resistant boards, insulation, fixings and head detail, and installed exactly as tested. Every service penetration must also be fire stopped with compatible tested products. Using fire board alone does not make a wall fire rated.
Who signs off a fire rated partition wall?
Where walls affect escape routes or compartmentation, Building Control normally reviews and inspects the work. Your fire risk assessor will also want evidence for the fire risk assessment. We hand over the system classification, fire-stopping records and photographs so both can verify what was built.
Get a guide price for fire rated partition walls in Derby in under a minute with our quote tool, or ask for a free survey and fixed quote.