- Region
- Scotland
- Nation
- Scotland
- Towns listed
- 4
- Main postcode areas
- EH
- Typical lead time
- 1–3 weeks
What should West Lothian projects plan for?
Offices in Livingston range from first-floor suites above the high street to modern units on the edge of town, and the right partition system depends as much on the building as on the budget.
For Livingston offices that stay occupied during the works, we split the installation into zones so only a small part of the floor is affected at any one time.
How much do fire rated partition walls cost in West Lothian?
The required duration (30, 60 or 90 minutes), number of fire board layers, wall height and the extent of fire stopping around services and at the head set the price. Typical lead time: 1–3 weeks. Guide prices, supply and install — fixed after a free survey.
Why choose us in West Lothian?
Penetrations planned
Services crossing the wall are coordinated in advance and sealed with tested products, which is where most fire walls actually fail in inspections.
Tested systems, documented
We use manufacturers' tested partition systems and hand over the relevant performance and test evidence at completion.
Handover records
You receive the system classification, fire-stopping record and photographs, giving your fire risk assessor and Building Control clear evidence of what was built.
Work around your hours
Evening and weekend installation can be arranged for occupied Livingston offices, keeping disruption to a minimum.
Office fit-outs often include walls that have a fire job to do: corridor walls on a protected escape route, enclosures around stairs, risers and plant, and walls that separate tenancies or compartments. A fire rated partition wall is built using the board manufacturer's tested system, specifying stud size, board type and number of layers, fixings, insulation and how the head and junctions are detailed. Follow that system and the wall carries its classified rating; deviate from it and the rating no longer applies.
Key specifications
| Test standard | Non-loadbearing walls tested to BS EN 1364-1 (older data to BS 476-22) |
|---|---|
| Insulation | Mineral wool to the system specification |
| Head detail | Tested fire-rated deflection head to accommodate slab movement |
| Fire stopping | Tested collars, wraps, sealants and batts for every penetration |
Surveys across West Lothian
We cover Livingston along with nearby Livingston, Bathgate and Linlithgow. Surveys are free and usually take under an hour for a typical office floor.
In Scotland, building standards are administered by local authority verifiers, and some partition works need a building warrant; we flag anything that may need one at survey stage.
How does a project run?
Measure and assess
We take accurate measurements on site in Livingston, check the ceiling void and floor, and agree what the new layout must achieve.
Drawings and quote
We prepare drawings and an itemised fixed price, adjusting the design until it works for your team and budget.
Manufacture and planning
Glass and components are made to the surveyed sizes while we plan access, deliveries and any out-of-hours working.
Installation and handover
The team installs, snags and cleans, then hands over the site with any test evidence and care guidance.
Towns we cover for fire rated partition walls in West Lothian
- Fire Rated Partition Walls in Livingston
- Fire Rated Partition Walls in Bathgate
- Fire Rated Partition Walls in Linlithgow
- Fire Rated Partition Walls in Broxburn
Fire Rated Partition Walls in West Lothian: FAQs
How soon can you start on a Livingston project?
Typical lead time for fire rated partition walls is 1–3 weeks from signed-off drawings, mostly because materials are made to measure. Installation itself is usually a matter of days for a typical office, and we can phase work around a Livingston office that stays open.
Can you work out of hours at our Livingston office?
Yes. Evening and weekend installation can be arranged in Livingston so the office keeps running. Out-of-hours working usually adds a percentage to the labour cost, which is shown clearly on the quote.
Do fire rated walls need fire doors?
Yes. A door in a fire rated wall must be a fire door set tested to the same or appropriate rating, with compatible frame, hinges, closer, seals and signage. A standard door undermines the wall. We supply complete tested door sets and can check existing doors for suitability.
Who signs off a fire rated partition wall?
Where walls affect escape routes or compartmentation, Building Control normally reviews and inspects the work. Your fire risk assessor will also want evidence for the fire risk assessment. We hand over the system classification, fire-stopping records and photographs so both can verify what was built.
Ready to plan fire rated partition walls in Livingston? Send a few details or call us and we will book a survey at a time that suits.