- Postcode area
- SL
- County
- Berkshire
- Region
- South East
- Population (approx.)
- 165,000
- From our Birmingham office
- 92 miles
- Typical lead time
- 1–2 weeks
How do Slough buildings affect the install?
Plenty of Slough businesses are growing into space they already lease, so we often reconfigure existing partitions and add new rooms in the same project.
Where a Slough building has a managing agent, we provide method statements, risk assessments and drawings in advance so the licence for alterations is not held up.
What do metal stud partition walls cost in Slough?
Wall height, board layers, insulation, skimming versus tape-and-joint finish, and any fire or acoustic upgrade move the cost per m² within this range. Typical lead time: 1–2 weeks. Guide prices, supply and install — fixed after a free survey.
Why do Slough businesses choose us?
Work around your hours
Evening and weekend installation can be arranged for occupied Slough offices, keeping disruption to a minimum.
Fixed price, in writing
Your quote lists the system, glass, doors, finishes and any extras, so the figure you approve is the figure you pay.
Light on the floor
Steel studs and plasterboard weigh far less than blockwork, which matters on upper floors, raised floors and older buildings with limited loading capacity.
Scalable performance
The same framing can take extra board layers and insulation to meet acoustic or fire targets, so one system covers most solid walls on a floor.
Typical metal stud partition walls projects we see in Slough include private offices and stores, kitchens and tea points and solid sections beside glazing. The cavity takes power, data and pipework easily, and back boxes for sockets and switches can be fitted at any height during the build.
Key specifications
| Framing | Galvanised steel C-studs and U-channels, typically 50–146mm, at 600mm or 400mm centres |
|---|---|
| Insulation | 25–100mm mineral wool in the cavity |
| Maximum height | Depends on stud size and centres; typically up to approx. 4–6m with heavier studs |
Do you survey in Slough?
Slough sits about 92 miles from our Birmingham base. Surveys are booked at a time that suits you, including early mornings, and the same project contact stays with you through to installation.
In England, partition works that affect fire safety or means of escape fall under the Building Regulations, so we flag anything that may need Building Control at survey stage.
What happens next?
Measure and assess
We take accurate measurements on site in Slough, check the ceiling void and floor, and agree what the new layout must achieve.
Specification sign-off
Drawings, system choice, glass and door details are confirmed in writing alongside a fixed quote.
Manufacture and planning
Glass and components are made to the surveyed sizes while we plan access, deliveries and any out-of-hours working.
Install and sign-off
We fit the partitions with minimal disruption, complete snagging and walk you through the finished space.
Slough metal stud partition walls FAQs
How much do metal stud partition walls cost in Slough?
Our guide price for metal stud partition walls is £55–£90 per m², supply and install, excluding VAT. The final price for a Slough project depends on the measured size, doors, glass or board specification and access, and is fixed after the free survey.
Can you work out of hours at our Slough office?
Yes. Evening and weekend installation can be arranged in Slough so the office keeps running. Out-of-hours working usually adds a percentage to the labour cost, which is shown clearly on the quote.
How soundproof is a metal stud partition wall?
A single-layer stud wall with mineral wool insulation typically achieves around Rw 40–45 dB in lab tests. That stops normal speech being understood in most offices. For higher privacy, double layers of acoustic board and resilient bars can reach about Rw 50–58 dB. On-site results are usually a little lower.
Should office stud walls go up to the slab?
If privacy or fire separation matters, yes. Walls that stop at a suspended ceiling allow sound and smoke to pass over the top through the ceiling void. Full-height walls, or a barrier in the void above, close that path. Landlords sometimes have a preference, so we check the building's rules at survey.
Whether your Slough project is a single room or a whole floor, we will survey, design and install your metal stud partition walls with one team.