Free site survey & fixed written quotesGlass, solid & demountable partitionsUK-wide installation teams
0800 088 6248
County Tyrone · BT postcodes

Metal Stud Partition Walls in Dungannon, County Tyrone

Our metal stud partition walls service covers Dungannon, County Tyrone end to end: measured survey, system advice, drawings for sign-off, manufacture and installation, then handover with the documents your landlord or building manager will ask for.

Guide £55–£90 per m² + VATLead time 1–2 weeksFree survey

Free survey in Dungannon

Tell us about the space — we'll call to book a measured survey.

Postcode area
BT
County
County Tyrone
Region
Northern Ireland
From our Birmingham office
240 miles
Typical lead time
1–2 weeks

What should Dungannon offices plan for?

In and around Dungannon many offices are in converted buildings, rural business units or small suites, so we design partitions to suit the space rather than forcing a standard layout.

For Dungannon businesses that share a building, we keep noise, dust and deliveries to agreed windows so neighbours are not disturbed.

Metal Stud Partition Walls prices in Dungannon

£55–£90 per m² + VAT

Wall height, board layers, insulation, skimming versus tape-and-joint finish, and any fire or acoustic upgrade move the cost per m² within this range. Typical lead time: 1–2 weeks. Guide prices, supply and install — fixed after a free survey.

Price my project

What do you get with us in Dungannon?

Tidy, protected sites

Floors and finishes are protected, waste is removed and the area is cleaned before handover.

Fast and clean

Dry construction means no wet trades or long drying times, so stud walls go up quickly and rooms are ready to decorate within days rather than weeks.

Landlord-ready paperwork

Drawings, method statements and risk assessments are supplied for your landlord or managing agent's approval.

Light on the floor

Steel studs and plasterboard weigh far less than blockwork, which matters on upper floors, raised floors and older buildings with limited loading capacity.

Typical metal stud partition walls projects we see in Dungannon include private offices and stores, kitchens and tea points and corridor walls. The same framing can take extra board layers and insulation to meet acoustic or fire targets, so one system covers most solid walls on a floor.

What specification is typical?

Acoustic performanceApprox. Rw 40–45 dB single layer with insulation (lab)
Maximum heightDepends on stud size and centres; typically up to approx. 4–6m with heavier studs
FinishTaped and jointed or skim plaster, ready for decoration

How do surveys work in Dungannon?

We cover Dungannon along with nearby Cookstown, Armagh and Portadown. Surveys are free and usually take under an hour for a typical office floor.

In Northern Ireland, the Building Regulations (Northern Ireland) apply and are administered by the local council's building control team; we flag anything that may need approval at survey stage.

What happens next?

  1. Measure and assess

    We take accurate measurements on site in Dungannon, check the ceiling void and floor, and agree what the new layout must achieve.

  2. Drawings and quote

    We prepare drawings and an itemised fixed price, adjusting the design until it works for your team and budget.

  3. Production and logistics

    Made-to-measure panels are produced and we book deliveries, lifts and parking around your building.

  4. Fit, check and hand over

    Installation is completed, doors and seals are adjusted, the area is cleaned and the job is signed off with you.

Dungannon metal stud partition walls FAQs

How soon can you start on a Dungannon project?

Typical lead time for metal stud partition walls is 1–2 weeks from signed-off drawings, mostly because materials are made to measure. Installation itself is usually a matter of days for a typical office, and we can phase work around a Dungannon office that stays open.

Do you cover areas near Dungannon?

Yes. As well as Dungannon we regularly cover Cookstown, Armagh and Portadown, plus the rest of County Tyrone and Northern Ireland. Survey and installation teams are arranged regionally.

How long does it take to build a stud partition wall?

A typical office stud wall of 10–20 linear metres takes around two to four days to frame, board and finish. Skimmed walls need an extra day or two to dry before decorating. Electrical first fix is done while the wall is open, so coordinate the electrician early.

Can you hang TVs and shelves on a metal stud wall?

Yes, if pattresses are built in. We fit timber or steel backing between the studs at the agreed positions during construction, so screens, shelving, whiteboards and wall-hung units have a solid fixing. Tell us what will be mounted and where before the wall is boarded.

Speak to us about metal stud partition walls for your Dungannon premises — free survey, clear drawings and a fixed price before work starts.

Metal Stud Partition Walls in Dungannon

Free survey, fixed written price and installation around your working hours.

Call Get a quote