- Region
- Wales
- Nation
- Wales
- Towns listed
- 4
- Main postcode areas
- CF
- Typical lead time
- 1–2 weeks
What should South Glamorgan projects plan for?
A lot of Cardiff's office space sits in multi-let buildings where the landlord's fit-out rules set what can fix to ceilings and floors. We read those rules early so the design is approved first time.
For Cardiff buildings with older timber floors or plastered ceilings, we check fixings and deflection on survey so the partitions stay true once the building moves with the seasons.
How much do metal stud partition walls cost in South Glamorgan?
Wall height, board layers, insulation, skimming versus tape-and-joint finish, and any fire or acoustic upgrade move the cost per m² within this range. Typical lead time: 1–2 weeks. Guide prices, supply and install — fixed after a free survey.
Why choose us in South Glamorgan?
One point of contact
A single project contact handles survey, drawings, ordering and installation, so you are not chasing different trades.
Fast and clean
Dry construction means no wet trades or long drying times, so stud walls go up quickly and rooms are ready to decorate within days rather than weeks.
Easy for services
The cavity takes power, data and pipework easily, and back boxes for sockets and switches can be fitted at any height during the build.
Landlord-ready paperwork
Drawings, method statements and risk assessments are supplied for your landlord or managing agent's approval.
When a room does not need to be glazed, metal stud is the default. Galvanised steel channels are fixed to floor and ceiling, studs go in at 600mm or 400mm centres, and plasterboard is screwed to both faces. Mineral wool in the cavity improves sound insulation, and the finished wall is taped and jointed or skimmed ready for decoration. It is fast, clean compared with blockwork, and easy to run cables and pipes through, which makes it ideal for stores, comms rooms, toilets, kitchens and offices where privacy matters more than daylight.
Key specifications
| Framing | Galvanised steel C-studs and U-channels, typically 50–146mm, at 600mm or 400mm centres |
|---|---|
| Boarding | 12.5mm or 15mm plasterboard, single or double layer each side |
| Acoustic performance | Approx. Rw 40–45 dB single layer with insulation (lab) |
| Finish | Taped and jointed or skim plaster, ready for decoration |
Surveys across South Glamorgan
Survey visits across South Glamorgan — including Cardiff, Cardiff and Barry — are free and carry no obligation. We measure, photograph and note services so the quote is accurate first time.
In Wales, the Building Regulations apply with Welsh-specific guidance, so we flag anything that may need Building Control — usually fire or escape-route changes — at survey stage.
How does a project run?
Book a survey
A member of the team measures the Cardiff office, notes access and services, and discusses layout, privacy and acoustics with you.
Drawings and quote
We prepare drawings and an itemised fixed price, adjusting the design until it works for your team and budget.
Production and logistics
Made-to-measure panels are produced and we book deliveries, lifts and parking around your building.
Installation and handover
The team installs, snags and cleans, then hands over the site with any test evidence and care guidance.
Towns we cover for metal stud partition walls in South Glamorgan
- Metal Stud Partition Walls in Cardiff
- Metal Stud Partition Walls in Barry
- Metal Stud Partition Walls in Penarth
- Metal Stud Partition Walls in Cowbridge
Metal Stud Partition Walls in South Glamorgan: FAQs
Will our Cardiff landlord need to approve the partitions?
If you lease your Cardiff office, the lease will usually require landlord consent — often a licence for alterations — before partitions are installed. We supply drawings, specifications and method statements to support the application.
Do you cover areas near Cardiff?
Yes. As well as Cardiff we regularly cover Cardiff, Barry and Penarth, plus the rest of South Glamorgan and Wales. Survey and installation teams are arranged regionally.
How much does a metal stud partition wall cost?
Metal stud partition walls typically cost £55–£90 per m² supplied and installed, excluding VAT. A single-layer board with insulation and a tape-and-joint finish sits at the lower end; double boarding, skimming and taller walls move towards the top. Doors, decoration and electrical work are priced separately. We confirm a fixed price after a free survey.
How long does it take to build a stud partition wall?
A typical office stud wall of 10–20 linear metres takes around two to four days to frame, board and finish. Skimmed walls need an extra day or two to dry before decorating. Electrical first fix is done while the wall is open, so coordinate the electrician early.
Get a guide price for metal stud partition walls in Cardiff in under a minute with our quote tool, or ask for a free survey and fixed quote.