- Region
- Yorkshire and the Humber
- Nation
- England
- Towns listed
- 10
- Main postcode areas
- DN, S
- Typical lead time
- 1–2 weeks
What should South Yorkshire projects plan for?
A lot of Sheffield's office space sits in multi-let buildings where the landlord's fit-out rules set what can fix to ceilings and floors. We read those rules early so the design is approved first time.
Smaller floorplates in Sheffield make every metre count, so we often recommend glass that keeps daylight moving across the office while still giving managers a private room.
How much do metal stud partition walls cost in South Yorkshire?
Wall height, board layers, insulation, skimming versus tape-and-joint finish, and any fire or acoustic upgrade move the cost per m² within this range. Typical lead time: 1–2 weeks. Guide prices, supply and install — fixed after a free survey.
Why choose us in South Yorkshire?
Light on the floor
Steel studs and plasterboard weigh far less than blockwork, which matters on upper floors, raised floors and older buildings with limited loading capacity.
Fixed price, in writing
Your quote lists the system, glass, doors, finishes and any extras, so the figure you approve is the figure you pay.
Landlord-ready paperwork
Drawings, method statements and risk assessments are supplied for your landlord or managing agent's approval.
Fast and clean
Dry construction means no wet trades or long drying times, so stud walls go up quickly and rooms are ready to decorate within days rather than weeks.
Stud walls also form the solid sections in mixed partitions: a glazed meeting room may have plasterboard walls either side, or a solid dado below a glazed screen. We frame openings for doors and glazing, add timber or steel pattresses where TVs, shelving or wall-hung units will go, and build to full height or to the underside of the ceiling depending on acoustic needs. A single-layer wall with insulation gives typically Rw 40–45 dB in lab tests, and the same system scales up for acoustic and fire-rated versions.
Key specifications
| Framing | Galvanised steel C-studs and U-channels, typically 50–146mm, at 600mm or 400mm centres |
|---|---|
| Boarding | 12.5mm or 15mm plasterboard, single or double layer each side |
| Insulation | 25–100mm mineral wool in the cavity |
| Finish | Taped and jointed or skim plaster, ready for decoration |
Surveys across South Yorkshire
Survey visits across South Yorkshire — including Sheffield, Sheffield and Doncaster — are free and carry no obligation. We measure, photograph and note services so the quote is accurate first time.
In England, partition works that affect fire safety or means of escape fall under the Building Regulations, so we flag anything that may need Building Control at survey stage.
How does a project run?
Measure and assess
We take accurate measurements on site in Sheffield, check the ceiling void and floor, and agree what the new layout must achieve.
Design and fixed price
You receive a layout, specification and a fixed, itemised quote. Nothing is ordered until you are happy with the drawings.
Manufacture and planning
Glass and components are made to the surveyed sizes while we plan access, deliveries and any out-of-hours working.
Fit, check and hand over
Installation is completed, doors and seals are adjusted, the area is cleaned and the job is signed off with you.
Towns we cover for metal stud partition walls in South Yorkshire
- Metal Stud Partition Walls in Sheffield
- Metal Stud Partition Walls in Doncaster
- Metal Stud Partition Walls in Rotherham
- Metal Stud Partition Walls in Barnsley
- Metal Stud Partition Walls in Mexborough
- Metal Stud Partition Walls in Wombwell
- Metal Stud Partition Walls in Maltby
- Metal Stud Partition Walls in Penistone
- Metal Stud Partition Walls in Stocksbridge
- Metal Stud Partition Walls in Thorne
Metal Stud Partition Walls in South Yorkshire: FAQs
How much do metal stud partition walls cost in Sheffield?
Our guide price for metal stud partition walls is £55–£90 per m², supply and install, excluding VAT. The final price for a Sheffield project depends on the measured size, doors, glass or board specification and access, and is fixed after the free survey.
Will our Sheffield landlord need to approve the partitions?
If you lease your Sheffield office, the lease will usually require landlord consent — often a licence for alterations — before partitions are installed. We supply drawings, specifications and method statements to support the application.
How soundproof is a metal stud partition wall?
A single-layer stud wall with mineral wool insulation typically achieves around Rw 40–45 dB in lab tests. That stops normal speech being understood in most offices. For higher privacy, double layers of acoustic board and resilient bars can reach about Rw 50–58 dB. On-site results are usually a little lower.
Can you hang TVs and shelves on a metal stud wall?
Yes, if pattresses are built in. We fit timber or steel backing between the studs at the agreed positions during construction, so screens, shelving, whiteboards and wall-hung units have a solid fixing. Tell us what will be mounted and where before the wall is boarded.
Speak to us about metal stud partition walls for your Sheffield premises — free survey, clear drawings and a fixed price before work starts.