- Postcode area
- BH
- County
- Dorset
- Region
- South West
- Population (approx.)
- 152,000
- From our Birmingham office
- 127 miles
- Typical lead time
- 5–7 weeks
Planning curved glass partitions in Poole: local points
Poole has a broad mix of workplaces — town-centre offices, business parks, healthcare sites and light industrial units — and each needs a slightly different approach to fixing, acoustics and access.
Business parks around Poole usually offer open floorplates with suspended ceilings, which suit glazed meeting rooms and full-height partitions once the ceiling void and services have been checked.
How much do curved glass partitions cost in Poole?
Radius, panel size and whether the glass is bent toughened or bent laminated set most of the cost, along with the curved head and base track that must be rolled to match. Typical lead time: 5–7 weeks. Guide prices, supply and install — fixed after a free survey.
Why use us for curved glass partitions in Poole?
Snagging and aftercare
We return to adjust doors and closers after the building settles, and repairs or alterations are only a call away.
A distinctive feature room
One curved meeting room or reception wall gives a floor a focal point and a sense of quality that flat partitions and graphics alone rarely achieve.
Mix with flat glass
Combining curved corners with flat runs keeps most of the visual impact while holding the overall partition cost closer to a standard glazed room.
Tested systems, documented
We use manufacturers' tested partition systems and hand over the relevant performance and test evidence at completion.
Typical curved glass partitions projects we see in Poole include feature meeting rooms, corridor corners and executive offices. Curved corners remove sharp junctions where corridors meet, improving sightlines and making busy routes feel less congested and easier to move through.
What specification is typical?
| Glass | Bent toughened 10–12mm (BS EN 12150) or bent laminated (BS EN 14449) |
|---|---|
| Radius | Typically from approx. 500mm upwards, depending on glass thickness and panel size |
| Track | Aluminium head and base channel rolled to the same radius, with deflection allowance |
How do surveys work in Poole?
We cover Poole along with nearby Bournemouth, Christchurch and Dorchester. Surveys are free and usually take under an hour for a typical office floor.
In England, partition works that affect fire safety or means of escape fall under the Building Regulations, so we flag anything that may need Building Control at survey stage.
What happens next?
Free survey
We visit your Poole premises, measure up, check ceilings, floors and services and talk through how the space needs to work.
Drawings and quote
We prepare drawings and an itemised fixed price, adjusting the design until it works for your team and budget.
Production and logistics
Made-to-measure panels are produced and we book deliveries, lifts and parking around your building.
Fit, check and hand over
Installation is completed, doors and seals are adjusted, the area is cleaned and the job is signed off with you.
Poole curved glass partitions FAQs
Do you install curved glass partitions in Poole?
Yes. We survey, supply and install curved glass partitions throughout Poole and the wider Dorset area, including Bournemouth and Christchurch. The survey is free and you receive a fixed, written quote before any work is booked.
How much do curved glass partitions cost in Poole?
Our guide price for curved glass partitions is £900–£1,600 per m², supply and install, excluding VAT. The final price for a Poole project depends on the measured size, doors, glass or board specification and access, and is fixed after the free survey.
What is the smallest radius for curved glass partitions?
It depends on glass thickness and panel size, but office partitions commonly start from around 500mm radius and up. Tighter curves limit how wide and tall each panel can be. We confirm the achievable radius with the glass processor at design stage, before any glass is ordered.
Why do curved glass partitions take longer?
Each panel is bent over a mould to your radius, then toughened or laminated, and the aluminium track has to be rolled to match. That bespoke processing usually means five to seven weeks from drawing approval. Installation itself takes two to three days for a typical room.
Get a guide price for curved glass partitions in Poole in under a minute with our quote tool, or ask for a free survey and fixed quote.