- Region
- South West
- Nation
- England
- Towns listed
- 6
- Main postcode areas
- BS, GL
- Typical lead time
- 5–7 weeks
What should Gloucestershire projects plan for?
Converted buildings in and around Gloucester often bring tricky ceiling lines and out-of-square walls; site-measured glass and adjustable head tracks take care of both.
Smaller floorplates in Gloucester make every metre count, so we often recommend glass that keeps daylight moving across the office while still giving managers a private room.
How much do curved glass partitions cost in Gloucestershire?
Radius, panel size and whether the glass is bent toughened or bent laminated set most of the cost, along with the curved head and base track that must be rolled to match. Typical lead time: 5–7 weeks. Guide prices, supply and install — fixed after a free survey.
Why choose us in Gloucestershire?
Fixed price, in writing
Your quote lists the system, glass, doors, finishes and any extras, so the figure you approve is the figure you pay.
Better circulation
Curved corners remove sharp junctions where corridors meet, improving sightlines and making busy routes feel less congested and easier to move through.
Tidy, protected sites
Floors and finishes are protected, waste is removed and the area is cleaned before handover.
Daylight kept
Like flat glass, curved panels let natural light flow across the floor, so a feature room does not create a dark core in the plan.
Design decisions need settling early. A tighter radius limits panel width and height, and the radius must be consistent so that adjacent panels and the rolled aluminium track line up. Doors are normally placed on a flat section or a straight return, since curved sliding or swing doors add significant cost and complexity. We can mix curved and flat panels, for example a curved corner on an otherwise straight meeting room, which keeps most of the visual effect while controlling the budget.
Key specifications
| Glass | Bent toughened 10–12mm (BS EN 12150) or bent laminated (BS EN 14449) |
|---|---|
| Radius | Typically from approx. 500mm upwards, depending on glass thickness and panel size |
| Panel height | Usually up to approx. 3m; taller panels subject to bending capacity |
| Joints | Clear butt joints or slim vertical posts at panel junctions |
Surveys across Gloucestershire
We cover Gloucester along with nearby Gloucester, Cheltenham and Stroud. Surveys are free and usually take under an hour for a typical office floor.
In England, partition works that affect fire safety or means of escape fall under the Building Regulations, so we flag anything that may need Building Control at survey stage.
How does a project run?
Free survey
We visit your Gloucester premises, measure up, check ceilings, floors and services and talk through how the space needs to work.
Drawings and quote
We prepare drawings and an itemised fixed price, adjusting the design until it works for your team and budget.
Manufacture and planning
Glass and components are made to the surveyed sizes while we plan access, deliveries and any out-of-hours working.
Install and sign-off
We fit the partitions with minimal disruption, complete snagging and walk you through the finished space.
Towns we cover for curved glass partitions in Gloucestershire
- Curved Glass Partitions in Gloucester
- Curved Glass Partitions in Cheltenham
- Curved Glass Partitions in Stroud
- Curved Glass Partitions in Tewkesbury
- Curved Glass Partitions in Cirencester
- Curved Glass Partitions in Yate
Curved Glass Partitions in Gloucestershire: FAQs
Do you install curved glass partitions in Gloucester?
Yes. We survey, supply and install curved glass partitions throughout Gloucester and the wider Gloucestershire area, including Gloucester and Cheltenham. The survey is free and you receive a fixed, written quote before any work is booked.
Do you cover areas near Gloucester?
Yes. As well as Gloucester we regularly cover Gloucester, Cheltenham and Stroud, plus the rest of Gloucestershire and South West. Survey and installation teams are arranged regionally.
What is the smallest radius for curved glass partitions?
It depends on glass thickness and panel size, but office partitions commonly start from around 500mm radius and up. Tighter curves limit how wide and tall each panel can be. We confirm the achievable radius with the glass processor at design stage, before any glass is ordered.
Can curved glass partitions have doors?
Yes, but doors are usually placed on a flat section or straight return of the room, which keeps hardware standard and costs down. Curved sliding doors are possible but add cost and lead time. We show the door options on the setting-out drawing so you can compare.
Tell us about your Gloucester office and we will arrange a free survey and a fixed, written quote for your curved glass partitions.