- Postcode area
- SP
- County
- Hampshire
- Region
- South East
- Population (approx.)
- 42,000
- From our Birmingham office
- 95 miles
- Typical lead time
- 5–7 weeks
Planning curved glass partitions in Andover: local points
Offices in Andover range from first-floor suites above the high street to modern units on the edge of town, and the right partition system depends as much on the building as on the budget.
Many Andover workplaces are owner-occupied, which makes it easier to choose systems for the long term — acoustic glass for meeting rooms, for example, rather than the cheapest option.
How much do curved glass partitions cost in Andover?
Radius, panel size and whether the glass is bent toughened or bent laminated set most of the cost, along with the curved head and base track that must be rolled to match. Typical lead time: 5–7 weeks. Guide prices, supply and install — fixed after a free survey.
What do you get with us in Andover?
One point of contact
A single project contact handles survey, drawings, ordering and installation, so you are not chasing different trades.
Better circulation
Curved corners remove sharp junctions where corridors meet, improving sightlines and making busy routes feel less congested and easier to move through.
Mix with flat glass
Combining curved corners with flat runs keeps most of the visual impact while holding the overall partition cost closer to a standard glazed room.
Clear guide prices online
Our curved glass partitions prices are published as guide ranges, so you can budget before the survey.
Typical curved glass partitions projects we see in Andover include feature meeting rooms, corridor corners and showroom and client suites. Like flat glass, curved panels let natural light flow across the floor, so a feature room does not create a dark core in the plan.
Key specifications
| Glass | Bent toughened 10–12mm (BS EN 12150) or bent laminated (BS EN 14449) |
|---|---|
| Panel height | Usually up to approx. 3m; taller panels subject to bending capacity |
| Acoustic performance | Approx. Rw 32–40 dB single glazed, depending on glass (lab) |
Covering Andover and nearby
Andover sits about 95 miles from our Birmingham base. Surveys are booked at a time that suits you, including early mornings, and the same project contact stays with you through to installation.
In England, partition works that affect fire safety or means of escape fall under the Building Regulations, so we flag anything that may need Building Control at survey stage.
How does a Andover project run?
Book a survey
A member of the team measures the Andover office, notes access and services, and discusses layout, privacy and acoustics with you.
Drawings and quote
We prepare drawings and an itemised fixed price, adjusting the design until it works for your team and budget.
Production and logistics
Made-to-measure panels are produced and we book deliveries, lifts and parking around your building.
Fit, check and hand over
Installation is completed, doors and seals are adjusted, the area is cleaned and the job is signed off with you.
Curved Glass Partitions in Andover: FAQs
Do you install curved glass partitions in Andover?
Yes. We survey, supply and install curved glass partitions throughout Andover and the wider Hampshire area, including Winchester and Newbury. The survey is free and you receive a fixed, written quote before any work is booked.
How much do curved glass partitions cost in Andover?
Our guide price for curved glass partitions is £900–£1,600 per m², supply and install, excluding VAT. The final price for a Andover project depends on the measured size, doors, glass or board specification and access, and is fixed after the free survey.
How much do curved glass partitions cost?
Curved glass partitions typically cost £900–£1,600 per m² supplied and installed, excluding VAT. Gentle radii in toughened glass sit at the lower end; tight radii, laminated glass and curved doors sit at the top. Combining curved corners with flat runs reduces the overall cost. We confirm a fixed price after a free survey.
What is the smallest radius for curved glass partitions?
It depends on glass thickness and panel size, but office partitions commonly start from around 500mm radius and up. Tighter curves limit how wide and tall each panel can be. We confirm the achievable radius with the glass processor at design stage, before any glass is ordered.
Ready to plan curved glass partitions in Andover? Send a few details or call us and we will book a survey at a time that suits.