- Region
- Wales
- Nation
- Wales
- Towns listed
- 5
- Main postcode areas
- LL
- Typical lead time
- 4–6 weeks
What should Gwynedd projects plan for?
In and around Caernarfon many offices are in converted buildings, rural business units or small suites, so we design partitions to suit the space rather than forcing a standard layout.
In Caernarfon, installations are often completed in a few days, and we can usually start on site soon after drawings are signed off because the survey answers the practical questions early.
How much do fire rated glass partitions cost in Gwynedd?
Insulated EI glass costs considerably more than integrity-only E glass, and the duration, frame system and fire-rated door sets account for most of the remaining range. Typical lead time: 4–6 weeks. Guide prices, supply and install — fixed after a free survey.
Why choose us in Gwynedd?
Tidy, protected sites
Floors and finishes are protected, waste is removed and the area is cleaned before handover.
Free survey in Caernarfon
We measure the space, check ceilings, floors and services, and talk through how you want the office to work before anything is priced.
Matched door sets
Fire-rated glazed doors are supplied as complete tested door sets with compatible hardware, avoiding the common fault of mixing uncertified components.
Compliance designed in
We check the required duration and E or EI class against your fire strategy before ordering, so the wall is right first time rather than reworked.
Some partitions are more than room dividers. Where a wall separates a corridor that forms an escape route, encloses a stair or plant room, or forms part of a fire compartment, it has to hold back fire and sometimes heat for a specified period. A fire rated glazed partition does that while still letting light through. The requirement normally comes from the fire strategy for the building or from Building Control, and it sets both the duration and whether the wall needs integrity only (E) or integrity and insulation (EI).
Key specifications
| Classification | E 30 / E 60 (integrity) or EI 30 / EI 60 (integrity and insulation) |
|---|---|
| Frames | Tested steel or aluminium framing with intumescent seals and specified fixings |
| Doors | Matching fire-rated glazed door sets with tested hinges, closers, locks and smoke seals |
| Regulations | Approved Document B; Approved Document K for safety glazing and manifestation |
Surveys across Gwynedd
We cover Caernarfon along with nearby Caernarfon, Holyhead and Llangefni. Surveys are free and usually take under an hour for a typical office floor.
In Wales, the Building Regulations apply with Welsh-specific guidance, so we flag anything that may need Building Control — usually fire or escape-route changes — at survey stage.
How does a project run?
Free survey
We visit your Caernarfon premises, measure up, check ceilings, floors and services and talk through how the space needs to work.
Specification sign-off
Drawings, system choice, glass and door details are confirmed in writing alongside a fixed quote.
Production and logistics
Made-to-measure panels are produced and we book deliveries, lifts and parking around your building.
Fit, check and hand over
Installation is completed, doors and seals are adjusted, the area is cleaned and the job is signed off with you.
Towns we cover for fire rated glass partitions in Gwynedd
- Fire Rated Glass Partitions in Caernarfon
- Fire Rated Glass Partitions in Holyhead
- Fire Rated Glass Partitions in Llangefni
- Fire Rated Glass Partitions in Pwllheli
- Fire Rated Glass Partitions in Porthmadog
Fire Rated Glass Partitions in Gwynedd: FAQs
How much do fire rated glass partitions cost in Caernarfon?
Our guide price for fire rated glass partitions is £850–£1,400 per m², supply and install, excluding VAT. The final price for a Caernarfon project depends on the measured size, doors, glass or board specification and access, and is fixed after the free survey.
Do you cover areas near Caernarfon?
Yes. As well as Caernarfon we regularly cover Caernarfon, Holyhead and Llangefni, plus the rest of Gwynedd and Wales. Survey and installation teams are arranged regionally.
What is the difference between E and EI fire rated glass?
E rated glass provides integrity only: it stops flames and hot gases passing through for the stated time but transmits heat. EI rated glass also provides insulation, limiting the temperature on the protected side, so people can pass close to it safely. EI is required in many escape routes and costs considerably more.
How long does a fire rated glass partition last in a fire?
Most office systems are classified for 30 or 60 minutes, written as E 30, EI 30, E 60 or EI 60. The figure is the time the tested system kept its integrity, and insulation where stated, in a standard furnace test to BS EN 1364-1. The duration you need is set by the building's fire strategy.
Tell us about your Caernarfon office and we will arrange a free survey and a fixed, written quote for your fire rated glass partitions.