- Region
- South West
- Nation
- England
- Towns listed
- 6
- Main postcode areas
- BH, DT
- Typical lead time
- 1–3 weeks
What should Dorset projects plan for?
For Bournemouth offices that stay occupied during the works, we split the installation into zones so only a small part of the floor is affected at any one time.
For Bournemouth buildings with older timber floors or plastered ceilings, we check fixings and deflection on survey so the partitions stay true once the building moves with the seasons.
How much do partition relocation & reconfiguration cost in Dorset?
The system type and its condition, how far it moves, how many new parts are needed to suit the new layout, and access at both locations set the price, typically 35–60% of new. Typical lead time: 1–3 weeks. Guide prices, supply and install — fixed after a free survey.
Why choose us in Dorset?
Tidy, protected sites
Floors and finishes are protected, waste is removed and the area is cleaned before handover.
Free survey in Bournemouth
We measure the space, check ceilings, floors and services, and talk through how you want the office to work before anything is priced.
Phased, room by room
On the same floor, rooms can be moved one at a time, so most teams keep working while the layout changes around them.
Familiar finishes kept
Teams keep the partitions, doors and finishes they know, and the new layout matches existing rooms that are staying in place.
Many partitions are designed to be moved, but they often end up in a skip at the end of a lease or during a reorganisation. If the system is a framed glass or demountable panel type in reasonable condition, it can usually be dismantled, stored if needed and refitted for considerably less than new, often around 35–60% of the cost. It also avoids sending glass and aluminium to waste, which helps if your organisation reports on fit-out waste or embodied carbon.
Key specifications
| Suitable systems | Framed single and double glazed, demountable solid and glazed panel systems |
|---|---|
| Less suitable | Silicone-jointed frameless glass, damaged or discontinued systems |
| Typical reuse | Glass, frames, panels, doors and hardware where dimensions allow |
| Cost guide | Typically 35–60% of the cost of new partitions |
Surveys across Dorset
We cover Bournemouth along with nearby Bournemouth, Poole and Dorchester. Surveys are free and usually take under an hour for a typical office floor.
In England, partition works that affect fire safety or means of escape fall under the Building Regulations, so we flag anything that may need Building Control at survey stage.
How does a project run?
Measure and assess
We take accurate measurements on site in Bournemouth, check the ceiling void and floor, and agree what the new layout must achieve.
Design and fixed price
You receive a layout, specification and a fixed, itemised quote. Nothing is ordered until you are happy with the drawings.
Production and logistics
Made-to-measure panels are produced and we book deliveries, lifts and parking around your building.
Installation and handover
The team installs, snags and cleans, then hands over the site with any test evidence and care guidance.
Towns we cover for partition relocation & reconfiguration in Dorset
- Partition Relocation & Reconfiguration in Bournemouth
- Partition Relocation & Reconfiguration in Poole
- Partition Relocation & Reconfiguration in Dorchester
- Partition Relocation & Reconfiguration in Weymouth
- Partition Relocation & Reconfiguration in Christchurch
- Partition Relocation & Reconfiguration in Bridport
Partition Relocation & Reconfiguration in Dorset: FAQs
How much do partition relocation & reconfiguration cost in Bournemouth?
Our guide price for partition relocation & reconfiguration is £120–£260 per m², supply and install, excluding VAT. The final price for a Bournemouth project depends on the measured size, doors, glass or board specification and access, and is fixed after the free survey.
Do you cover areas near Bournemouth?
Yes. As well as Bournemouth we regularly cover Bournemouth, Poole and Dorchester, plus the rest of Dorset and South West. Survey and installation teams are arranged regionally.
How much does it cost to relocate office partitions?
Relocating partitions typically costs £120–£260 per m² supplied and installed, excluding VAT, often around 35–60% of the cost of new. The system, condition, distance and the number of new parts needed for the new layout set the price. We confirm a fixed price after surveying both locations.
Can fire rated partitions be relocated?
Only if the complete tested system can be refitted exactly as tested, with the correct frames, glass, seals, fixings and door hardware. Missing or damaged parts must be replaced with the system's own components. If that is not possible, the relocated wall cannot be relied on as fire rated.
Whether your Bournemouth project is a single room or a whole floor, we will survey, design and install your partition relocation & reconfiguration with one team.