- Region
- East of England
- Nation
- England
- Towns listed
- 6
- Main postcode areas
- CB, PE
- Typical lead time
- 1–2 weeks
What should Cambridgeshire projects plan for?
For Cambridge offices that stay occupied during the works, we split the installation into zones so only a small part of the floor is affected at any one time.
Offices in Cambridge range from first-floor suites above the high street to modern units on the edge of town, and the right partition system depends as much on the building as on the budget.
How much do metal stud partition walls cost in Cambridgeshire?
Wall height, board layers, insulation, skimming versus tape-and-joint finish, and any fire or acoustic upgrade move the cost per m² within this range. Typical lead time: 1–2 weeks. Guide prices, supply and install — fixed after a free survey.
Why choose us in Cambridgeshire?
Light on the floor
Steel studs and plasterboard weigh far less than blockwork, which matters on upper floors, raised floors and older buildings with limited loading capacity.
Tested systems, documented
We use manufacturers' tested partition systems and hand over the relevant performance and test evidence at completion.
Easy for services
The cavity takes power, data and pipework easily, and back boxes for sockets and switches can be fitted at any height during the build.
One point of contact
A single project contact handles survey, drawings, ordering and installation, so you are not chasing different trades.
When a room does not need to be glazed, metal stud is the default. Galvanised steel channels are fixed to floor and ceiling, studs go in at 600mm or 400mm centres, and plasterboard is screwed to both faces. Mineral wool in the cavity improves sound insulation, and the finished wall is taped and jointed or skimmed ready for decoration. It is fast, clean compared with blockwork, and easy to run cables and pipes through, which makes it ideal for stores, comms rooms, toilets, kitchens and offices where privacy matters more than daylight.
Key specifications
| Framing | Galvanised steel C-studs and U-channels, typically 50–146mm, at 600mm or 400mm centres |
|---|---|
| Boarding | 12.5mm or 15mm plasterboard, single or double layer each side |
| Insulation | 25–100mm mineral wool in the cavity |
| Acoustic performance | Approx. Rw 40–45 dB single layer with insulation (lab) |
Surveys across Cambridgeshire
Survey visits across Cambridgeshire — including Cambridge, Cambridge and Peterborough — are free and carry no obligation. We measure, photograph and note services so the quote is accurate first time.
In England, partition works that affect fire safety or means of escape fall under the Building Regulations, so we flag anything that may need Building Control at survey stage.
How does a project run?
Measure and assess
We take accurate measurements on site in Cambridge, check the ceiling void and floor, and agree what the new layout must achieve.
Design and fixed price
You receive a layout, specification and a fixed, itemised quote. Nothing is ordered until you are happy with the drawings.
Production and logistics
Made-to-measure panels are produced and we book deliveries, lifts and parking around your building.
Installation and handover
The team installs, snags and cleans, then hands over the site with any test evidence and care guidance.
Towns we cover for metal stud partition walls in Cambridgeshire
- Metal Stud Partition Walls in Cambridge
- Metal Stud Partition Walls in Peterborough
- Metal Stud Partition Walls in Huntingdon
- Metal Stud Partition Walls in St Neots
- Metal Stud Partition Walls in Ely
- Metal Stud Partition Walls in Wisbech
Metal Stud Partition Walls in Cambridgeshire: FAQs
How much do metal stud partition walls cost in Cambridge?
Our guide price for metal stud partition walls is £55–£90 per m², supply and install, excluding VAT. The final price for a Cambridge project depends on the measured size, doors, glass or board specification and access, and is fixed after the free survey.
How soon can you start on a Cambridge project?
Typical lead time for metal stud partition walls is 1–2 weeks from signed-off drawings, mostly because materials are made to measure. Installation itself is usually a matter of days for a typical office, and we can phase work around a Cambridge office that stays open.
How long does it take to build a stud partition wall?
A typical office stud wall of 10–20 linear metres takes around two to four days to frame, board and finish. Skimmed walls need an extra day or two to dry before decorating. Electrical first fix is done while the wall is open, so coordinate the electrician early.
Can you hang TVs and shelves on a metal stud wall?
Yes, if pattresses are built in. We fit timber or steel backing between the studs at the agreed positions during construction, so screens, shelving, whiteboards and wall-hung units have a solid fixing. Tell us what will be mounted and where before the wall is boarded.
Ready to plan metal stud partition walls in Cambridge? Send a few details or call us and we will book a survey at a time that suits.