- Region
- East of England
- Nation
- England
- Towns listed
- 6
- Main postcode areas
- CB, PE
- Typical lead time
- 4–6 weeks
What should Cambridgeshire projects plan for?
Cambridge has a broad mix of workplaces — town-centre offices, business parks, healthcare sites and light industrial units — and each needs a slightly different approach to fixing, acoustics and access.
Many Cambridge workplaces are owner-occupied, which makes it easier to choose systems for the long term — acoustic glass for meeting rooms, for example, rather than the cheapest option.
How much do switchable smart glass partitions cost in Cambridgeshire?
Price depends on the switchable glass area, the number of individually controlled zones, the control method and the electrical work needed to bring power and cabling to each panel. Typical lead time: 4–6 weeks. Guide prices, supply and install — fixed after a free survey.
Why choose us in Cambridgeshire?
No blinds to maintain
There are no slats, cords or fabric to clean, repair or replace, and the clean glass line stays uncluttered whichever state the room is in.
Fixed price, in writing
Your quote lists the system, glass, doors, finishes and any extras, so the figure you approve is the figure you pay.
Open by default
When privacy is not needed the glass is clear, so meeting rooms keep the open, connected feel that many organisations want across the floor.
Snagging and aftercare
We return to adjust doors and closers after the building settles, and repairs or alterations are only a call away.
Smart glass solves a common conflict in office design: people want meeting rooms to feel open, but they also need privacy for interviews, screen presentations and sensitive calls. With switchable glass, the wall stays clear by default and turns opaque at the press of a wall switch, a room booking panel or an occupancy sensor. The opaque state still lets diffused light through, so the room never goes dark, and when it switches back the glass is as clear as a standard laminated panel.
Key specifications
| Technology | PDLC liquid crystal film laminated between two glass layers |
|---|---|
| Glass build-up | Typically 10.8–13.5mm laminated to BS EN 14449 |
| Power | Low-voltage AC via transformer; low running consumption per m² |
| Acoustic performance | Approx. Rw 34–38 dB single glazed (lab), similar to standard laminate |
Surveys across Cambridgeshire
We cover Cambridge along with nearby Cambridge, Peterborough and Huntingdon. Surveys are free and usually take under an hour for a typical office floor.
In England, partition works that affect fire safety or means of escape fall under the Building Regulations, so we flag anything that may need Building Control at survey stage.
How does a project run?
Measure and assess
We take accurate measurements on site in Cambridge, check the ceiling void and floor, and agree what the new layout must achieve.
Drawings and quote
We prepare drawings and an itemised fixed price, adjusting the design until it works for your team and budget.
Order and schedule
Materials are ordered to exact sizes and we agree installation dates, working hours and site rules with you.
Fit, check and hand over
Installation is completed, doors and seals are adjusted, the area is cleaned and the job is signed off with you.
Towns we cover for switchable smart glass partitions in Cambridgeshire
- Switchable Smart Glass Partitions in Cambridge
- Switchable Smart Glass Partitions in Peterborough
- Switchable Smart Glass Partitions in Huntingdon
- Switchable Smart Glass Partitions in St Neots
- Switchable Smart Glass Partitions in Ely
- Switchable Smart Glass Partitions in Wisbech
Switchable Smart Glass Partitions in Cambridgeshire: FAQs
How much do switchable smart glass partitions cost in Cambridge?
Our guide price for switchable smart glass partitions is £1,100–£1,700 per m², supply and install, excluding VAT. The final price for a Cambridge project depends on the measured size, doors, glass or board specification and access, and is fixed after the free survey.
How soon can you start on a Cambridge project?
Typical lead time for switchable smart glass partitions is 4–6 weeks from signed-off drawings, mostly because materials are made to measure. Installation itself is usually a matter of days for a typical office, and we can phase work around a Cambridge office that stays open.
Does smart glass make a room soundproof?
No. Switchable glass changes how the room looks, not how much sound passes through. Its acoustic performance is similar to other single glazed laminated glass, roughly Rw 34–38 dB in lab tests. For confidential rooms, combine smart glass with acoustic seals, sealed doors and attention to the ceiling void.
Does smart glass use a lot of electricity?
No. Running consumption is low per square metre, and the glass only draws power while it is clear. A typical meeting room uses a small fraction of the energy of its lighting. The main electrical cost is the one-off installation of the supply and controls.
Speak to us about switchable smart glass partitions for your Cambridge premises — free survey, clear drawings and a fixed price before work starts.