- Region
- South East
- Nation
- England
- Towns listed
- 10
- Main postcode areas
- GU, PO, RG, SO, SP
- Typical lead time
- 1–2 weeks
What should Hampshire projects plan for?
Older stock across Southampton — period buildings, converted warehouses and 1960s–80s blocks — tends to have uneven floors and varied ceiling heights, which is why every quote here follows a measured survey rather than a guess.
In Southampton, installations are often completed in a few days, and we can usually start on site soon after drawings are signed off because the survey answers the practical questions early.
How much do metal stud partition walls cost in Hampshire?
Wall height, board layers, insulation, skimming versus tape-and-joint finish, and any fire or acoustic upgrade move the cost per m² within this range. Typical lead time: 1–2 weeks. Guide prices, supply and install — fixed after a free survey.
Why choose us in Hampshire?
Easy for services
The cavity takes power, data and pipework easily, and back boxes for sockets and switches can be fitted at any height during the build.
Tested systems, documented
We use manufacturers' tested partition systems and hand over the relevant performance and test evidence at completion.
Light on the floor
Steel studs and plasterboard weigh far less than blockwork, which matters on upper floors, raised floors and older buildings with limited loading capacity.
Clear guide prices online
Our metal stud partition walls prices are published as guide ranges, so you can budget before the survey.
Stud walls also form the solid sections in mixed partitions: a glazed meeting room may have plasterboard walls either side, or a solid dado below a glazed screen. We frame openings for doors and glazing, add timber or steel pattresses where TVs, shelving or wall-hung units will go, and build to full height or to the underside of the ceiling depending on acoustic needs. A single-layer wall with insulation gives typically Rw 40–45 dB in lab tests, and the same system scales up for acoustic and fire-rated versions.
Key specifications
| Insulation | 25–100mm mineral wool in the cavity |
|---|---|
| Acoustic performance | Approx. Rw 40–45 dB single layer with insulation (lab) |
| Maximum height | Depends on stud size and centres; typically up to approx. 4–6m with heavier studs |
| Finish | Taped and jointed or skim plaster, ready for decoration |
Surveys across Hampshire
We cover Southampton along with nearby Southampton, Portsmouth and Winchester. Surveys are free and usually take under an hour for a typical office floor.
In England, partition works that affect fire safety or means of escape fall under the Building Regulations, so we flag anything that may need Building Control at survey stage.
How does a project run?
Book a survey
A member of the team measures the Southampton office, notes access and services, and discusses layout, privacy and acoustics with you.
Design and fixed price
You receive a layout, specification and a fixed, itemised quote. Nothing is ordered until you are happy with the drawings.
Order and schedule
Materials are ordered to exact sizes and we agree installation dates, working hours and site rules with you.
Install and sign-off
We fit the partitions with minimal disruption, complete snagging and walk you through the finished space.
Towns we cover for metal stud partition walls in Hampshire
- Metal Stud Partition Walls in Southampton
- Metal Stud Partition Walls in Portsmouth
- Metal Stud Partition Walls in Winchester
- Metal Stud Partition Walls in Basingstoke
- Metal Stud Partition Walls in Fareham
- Metal Stud Partition Walls in Eastleigh
- Metal Stud Partition Walls in Andover
- Metal Stud Partition Walls in Aldershot
- Metal Stud Partition Walls in Farnborough
- Metal Stud Partition Walls in Havant
Metal Stud Partition Walls in Hampshire: FAQs
Do you install metal stud partition walls in Southampton?
Yes. We survey, supply and install metal stud partition walls throughout Southampton and the wider Hampshire area, including Southampton and Portsmouth. The survey is free and you receive a fixed, written quote before any work is booked.
How much do metal stud partition walls cost in Southampton?
Our guide price for metal stud partition walls is £55–£90 per m², supply and install, excluding VAT. The final price for a Southampton project depends on the measured size, doors, glass or board specification and access, and is fixed after the free survey.
How long does it take to build a stud partition wall?
A typical office stud wall of 10–20 linear metres takes around two to four days to frame, board and finish. Skimmed walls need an extra day or two to dry before decorating. Electrical first fix is done while the wall is open, so coordinate the electrician early.
How soundproof is a metal stud partition wall?
A single-layer stud wall with mineral wool insulation typically achieves around Rw 40–45 dB in lab tests. That stops normal speech being understood in most offices. For higher privacy, double layers of acoustic board and resilient bars can reach about Rw 50–58 dB. On-site results are usually a little lower.
Get a guide price for metal stud partition walls in Southampton in under a minute with our quote tool, or ask for a free survey and fixed quote.