- Region
- South West
- Nation
- England
- Towns listed
- 7
- Main postcode areas
- BA, SN, SP
- Typical lead time
- 1–2 weeks
What should Wiltshire projects plan for?
Plenty of Swindon businesses are growing into space they already lease, so we often reconfigure existing partitions and add new rooms in the same project.
Many Swindon workplaces are owner-occupied, which makes it easier to choose systems for the long term — acoustic glass for meeting rooms, for example, rather than the cheapest option.
How much do metal stud partition walls cost in Wiltshire?
Wall height, board layers, insulation, skimming versus tape-and-joint finish, and any fire or acoustic upgrade move the cost per m² within this range. Typical lead time: 1–2 weeks. Guide prices, supply and install — fixed after a free survey.
Why choose us in Wiltshire?
Easy for services
The cavity takes power, data and pipework easily, and back boxes for sockets and switches can be fitted at any height during the build.
Snagging and aftercare
We return to adjust doors and closers after the building settles, and repairs or alterations are only a call away.
Covering all of Wiltshire
Survey and installation teams cover Swindon and the wider Wiltshire area, including Swindon and Salisbury.
Fast and clean
Dry construction means no wet trades or long drying times, so stud walls go up quickly and rooms are ready to decorate within days rather than weeks.
Stud walls also form the solid sections in mixed partitions: a glazed meeting room may have plasterboard walls either side, or a solid dado below a glazed screen. We frame openings for doors and glazing, add timber or steel pattresses where TVs, shelving or wall-hung units will go, and build to full height or to the underside of the ceiling depending on acoustic needs. A single-layer wall with insulation gives typically Rw 40–45 dB in lab tests, and the same system scales up for acoustic and fire-rated versions.
Key specifications
| Framing | Galvanised steel C-studs and U-channels, typically 50–146mm, at 600mm or 400mm centres |
|---|---|
| Insulation | 25–100mm mineral wool in the cavity |
| Maximum height | Depends on stud size and centres; typically up to approx. 4–6m with heavier studs |
| Finish | Taped and jointed or skim plaster, ready for decoration |
Surveys across Wiltshire
Survey visits across Wiltshire — including Swindon, Swindon and Salisbury — are free and carry no obligation. We measure, photograph and note services so the quote is accurate first time.
In England, partition works that affect fire safety or means of escape fall under the Building Regulations, so we flag anything that may need Building Control at survey stage.
How does a project run?
Book a survey
A member of the team measures the Swindon office, notes access and services, and discusses layout, privacy and acoustics with you.
Drawings and quote
We prepare drawings and an itemised fixed price, adjusting the design until it works for your team and budget.
Production and logistics
Made-to-measure panels are produced and we book deliveries, lifts and parking around your building.
Fit, check and hand over
Installation is completed, doors and seals are adjusted, the area is cleaned and the job is signed off with you.
Towns we cover for metal stud partition walls in Wiltshire
- Metal Stud Partition Walls in Swindon
- Metal Stud Partition Walls in Salisbury
- Metal Stud Partition Walls in Chippenham
- Metal Stud Partition Walls in Trowbridge
- Metal Stud Partition Walls in Devizes
- Metal Stud Partition Walls in Melksham
- Metal Stud Partition Walls in Warminster
Metal Stud Partition Walls in Wiltshire: FAQs
How soon can you start on a Swindon project?
Typical lead time for metal stud partition walls is 1–2 weeks from signed-off drawings, mostly because materials are made to measure. Installation itself is usually a matter of days for a typical office, and we can phase work around a Swindon office that stays open.
Do you cover areas near Swindon?
Yes. As well as Swindon we regularly cover Swindon, Salisbury and Chippenham, plus the rest of Wiltshire and South West. Survey and installation teams are arranged regionally.
How much does a metal stud partition wall cost?
Metal stud partition walls typically cost £55–£90 per m² supplied and installed, excluding VAT. A single-layer board with insulation and a tape-and-joint finish sits at the lower end; double boarding, skimming and taller walls move towards the top. Doors, decoration and electrical work are priced separately. We confirm a fixed price after a free survey.
Can you hang TVs and shelves on a metal stud wall?
Yes, if pattresses are built in. We fit timber or steel backing between the studs at the agreed positions during construction, so screens, shelving, whiteboards and wall-hung units have a solid fixing. Tell us what will be mounted and where before the wall is boarded.
Whether your Swindon project is a single room or a whole floor, we will survey, design and install your metal stud partition walls with one team.