- Postcode area
- NN
- County
- Northamptonshire
- Region
- East Midlands
- Population (approx.)
- 68,000
- From our Birmingham office
- 52 miles
- Typical lead time
- 1–2 weeks
What is different about partitioning in Corby?
Smaller floorplates in Corby make every metre count, so we often recommend glass that keeps daylight moving across the office while still giving managers a private room.
In Corby, installations are often completed in a few days, and we can usually start on site soon after drawings are signed off because the survey answers the practical questions early.
How much do metal stud partition walls cost in Corby?
Wall height, board layers, insulation, skimming versus tape-and-joint finish, and any fire or acoustic upgrade move the cost per m² within this range. Typical lead time: 1–2 weeks. Guide prices, supply and install — fixed after a free survey.
Why do Corby businesses choose us?
Light on the floor
Steel studs and plasterboard weigh far less than blockwork, which matters on upper floors, raised floors and older buildings with limited loading capacity.
Work around your hours
Evening and weekend installation can be arranged for occupied Corby offices, keeping disruption to a minimum.
Tested systems, documented
We use manufacturers' tested partition systems and hand over the relevant performance and test evidence at completion.
Fast and clean
Dry construction means no wet trades or long drying times, so stud walls go up quickly and rooms are ready to decorate within days rather than weeks.
Typical metal stud partition walls projects we see in Corby include private offices and stores, comms and server rooms and corridor walls. The cavity takes power, data and pipework easily, and back boxes for sockets and switches can be fitted at any height during the build.
Specification highlights
| Framing | Galvanised steel C-studs and U-channels, typically 50–146mm, at 600mm or 400mm centres |
|---|---|
| Insulation | 25–100mm mineral wool in the cavity |
| Acoustic performance | Approx. Rw 40–45 dB single layer with insulation (lab) |
Covering Corby and nearby
We cover Corby along with nearby Uppingham, Kettering and Market Harborough. Surveys are free and usually take under an hour for a typical office floor.
In England, partition works that affect fire safety or means of escape fall under the Building Regulations, so we flag anything that may need Building Control at survey stage.
From survey to handover
Free survey
We visit your Corby premises, measure up, check ceilings, floors and services and talk through how the space needs to work.
Design and fixed price
You receive a layout, specification and a fixed, itemised quote. Nothing is ordered until you are happy with the drawings.
Production and logistics
Made-to-measure panels are produced and we book deliveries, lifts and parking around your building.
Install and sign-off
We fit the partitions with minimal disruption, complete snagging and walk you through the finished space.
Metal Stud Partition Walls in Corby: FAQs
Do you install metal stud partition walls in Corby?
Yes. We survey, supply and install metal stud partition walls throughout Corby and the wider Northamptonshire area, including Uppingham and Kettering. The survey is free and you receive a fixed, written quote before any work is booked.
Can you work out of hours at our Corby office?
Yes. Evening and weekend installation can be arranged in Corby so the office keeps running. Out-of-hours working usually adds a percentage to the labour cost, which is shown clearly on the quote.
How soundproof is a metal stud partition wall?
A single-layer stud wall with mineral wool insulation typically achieves around Rw 40–45 dB in lab tests. That stops normal speech being understood in most offices. For higher privacy, double layers of acoustic board and resilient bars can reach about Rw 50–58 dB. On-site results are usually a little lower.
Should office stud walls go up to the slab?
If privacy or fire separation matters, yes. Walls that stop at a suspended ceiling allow sound and smoke to pass over the top through the ceiling void. Full-height walls, or a barrier in the void above, close that path. Landlords sometimes have a preference, so we check the building's rules at survey.
Ready to plan metal stud partition walls in Corby? Send a few details or call us and we will book a survey at a time that suits.