- Postcode area
- NN
- County
- Northamptonshire
- Region
- East Midlands
- Population (approx.)
- 57,000
- From our Birmingham office
- 52 miles
- Typical lead time
- 1–2 weeks
What should Kettering offices plan for?
Smaller floorplates in Kettering make every metre count, so we often recommend glass that keeps daylight moving across the office while still giving managers a private room.
For Kettering buildings with older timber floors or plastered ceilings, we check fixings and deflection on survey so the partitions stay true once the building moves with the seasons.
Metal Stud Partition Walls prices in Kettering
Wall height, board layers, insulation, skimming versus tape-and-joint finish, and any fire or acoustic upgrade move the cost per m² within this range. Typical lead time: 1–2 weeks. Guide prices, supply and install — fixed after a free survey.
Why do Kettering businesses choose us?
Snagging and aftercare
We return to adjust doors and closers after the building settles, and repairs or alterations are only a call away.
Light on the floor
Steel studs and plasterboard weigh far less than blockwork, which matters on upper floors, raised floors and older buildings with limited loading capacity.
Tidy, protected sites
Floors and finishes are protected, waste is removed and the area is cleaned before handover.
Fast and clean
Dry construction means no wet trades or long drying times, so stud walls go up quickly and rooms are ready to decorate within days rather than weeks.
Typical metal stud partition walls projects we see in Kettering include comms and server rooms, toilet and shower enclosures and solid sections beside glazing. The same framing can take extra board layers and insulation to meet acoustic or fire targets, so one system covers most solid walls on a floor.
Specification highlights
| Boarding | 12.5mm or 15mm plasterboard, single or double layer each side |
|---|---|
| Insulation | 25–100mm mineral wool in the cavity |
| Finish | Taped and jointed or skim plaster, ready for decoration |
Do you survey in Kettering?
From our Birmingham office (around 52 miles away) we coordinate surveys and installations throughout East Midlands. In Kettering, that means a free measured survey and a written, fixed quote.
In England, partition works that affect fire safety or means of escape fall under the Building Regulations, so we flag anything that may need Building Control at survey stage.
How does a Kettering project run?
Book a survey
A member of the team measures the Kettering office, notes access and services, and discusses layout, privacy and acoustics with you.
Drawings and quote
We prepare drawings and an itemised fixed price, adjusting the design until it works for your team and budget.
Manufacture and planning
Glass and components are made to the surveyed sizes while we plan access, deliveries and any out-of-hours working.
Installation and handover
The team installs, snags and cleans, then hands over the site with any test evidence and care guidance.
Questions about metal stud partition walls in Kettering
How much do metal stud partition walls cost in Kettering?
Our guide price for metal stud partition walls is £55–£90 per m², supply and install, excluding VAT. The final price for a Kettering project depends on the measured size, doors, glass or board specification and access, and is fixed after the free survey.
Can you work out of hours at our Kettering office?
Yes. Evening and weekend installation can be arranged in Kettering so the office keeps running. Out-of-hours working usually adds a percentage to the labour cost, which is shown clearly on the quote.
Should office stud walls go up to the slab?
If privacy or fire separation matters, yes. Walls that stop at a suspended ceiling allow sound and smoke to pass over the top through the ceiling void. Full-height walls, or a barrier in the void above, close that path. Landlords sometimes have a preference, so we check the building's rules at survey.
Can you hang TVs and shelves on a metal stud wall?
Yes, if pattresses are built in. We fit timber or steel backing between the studs at the agreed positions during construction, so screens, shelving, whiteboards and wall-hung units have a solid fixing. Tell us what will be mounted and where before the wall is boarded.
Speak to us about metal stud partition walls for your Kettering premises — free survey, clear drawings and a fixed price before work starts.