- Postcode area
- SN
- County
- Wiltshire
- Region
- South West
- Population (approx.)
- 202,000
- From our Birmingham office
- 69 miles
- Typical lead time
- 1–2 weeks
How do Swindon buildings affect the install?
Swindon has a broad mix of workplaces — town-centre offices, business parks, healthcare sites and light industrial units — and each needs a slightly different approach to fixing, acoustics and access.
For Swindon offices that stay occupied during the works, we split the installation into zones so only a small part of the floor is affected at any one time.
How much do metal stud partition walls cost in Swindon?
Wall height, board layers, insulation, skimming versus tape-and-joint finish, and any fire or acoustic upgrade move the cost per m² within this range. Typical lead time: 1–2 weeks. Guide prices, supply and install — fixed after a free survey.
What do you get with us in Swindon?
Easy for services
The cavity takes power, data and pipework easily, and back boxes for sockets and switches can be fitted at any height during the build.
Scalable performance
The same framing can take extra board layers and insulation to meet acoustic or fire targets, so one system covers most solid walls on a floor.
Fixed price, in writing
Your quote lists the system, glass, doors, finishes and any extras, so the figure you approve is the figure you pay.
Work around your hours
Evening and weekend installation can be arranged for occupied Swindon offices, keeping disruption to a minimum.
Typical metal stud partition walls projects we see in Swindon include comms and server rooms, toilet and shower enclosures and solid sections beside glazing. Dry construction means no wet trades or long drying times, so stud walls go up quickly and rooms are ready to decorate within days rather than weeks.
Key specifications
| Framing | Galvanised steel C-studs and U-channels, typically 50–146mm, at 600mm or 400mm centres |
|---|---|
| Boarding | 12.5mm or 15mm plasterboard, single or double layer each side |
| Acoustic performance | Approx. Rw 40–45 dB single layer with insulation (lab) |
Do you survey in Swindon?
Our office is in Great Barr, Birmingham — roughly 69 miles from Swindon as the crow flies — and survey and installation teams are arranged regionally, so distance does not change the price structure.
In England, partition works that affect fire safety or means of escape fall under the Building Regulations, so we flag anything that may need Building Control at survey stage.
From survey to handover
Measure and assess
We take accurate measurements on site in Swindon, check the ceiling void and floor, and agree what the new layout must achieve.
Drawings and quote
We prepare drawings and an itemised fixed price, adjusting the design until it works for your team and budget.
Production and logistics
Made-to-measure panels are produced and we book deliveries, lifts and parking around your building.
Fit, check and hand over
Installation is completed, doors and seals are adjusted, the area is cleaned and the job is signed off with you.
Metal Stud Partition Walls in Swindon: FAQs
How much do metal stud partition walls cost in Swindon?
Our guide price for metal stud partition walls is £55–£90 per m², supply and install, excluding VAT. The final price for a Swindon project depends on the measured size, doors, glass or board specification and access, and is fixed after the free survey.
How soon can you start on a Swindon project?
Typical lead time for metal stud partition walls is 1–2 weeks from signed-off drawings, mostly because materials are made to measure. Installation itself is usually a matter of days for a typical office, and we can phase work around a Swindon office that stays open.
How much does a metal stud partition wall cost?
Metal stud partition walls typically cost £55–£90 per m² supplied and installed, excluding VAT. A single-layer board with insulation and a tape-and-joint finish sits at the lower end; double boarding, skimming and taller walls move towards the top. Doors, decoration and electrical work are priced separately. We confirm a fixed price after a free survey.
How soundproof is a metal stud partition wall?
A single-layer stud wall with mineral wool insulation typically achieves around Rw 40–45 dB in lab tests. That stops normal speech being understood in most offices. For higher privacy, double layers of acoustic board and resilient bars can reach about Rw 50–58 dB. On-site results are usually a little lower.
Tell us about your Swindon office and we will arrange a free survey and a fixed, written quote for your metal stud partition walls.